The RCI Digital High-Resolution Controller is for use in the RCEL-6 through RCEL-250 sizes along with all RCE series electric  actuators. The unit is a high performance digital positioner intended for use in AC actuators providing 450 points of resolution. The unit  can be used with our actuators operating from cycle times of 2 seconds to 90 seconds.

The simple three button control is used to configure all parameters the unit needs for a variety of applications. This allows the open and closed positions to be easily set for direct or reverse acting without rewiring. The unit can be configured for various command types (4-20 mA, 1-5V, 0-5V, 0-10V or a digitial command) and its fail mode on loss of signal.

With it's modular design a variety of options are easily plugged in providing other features. A wide range of data is accessible through a digital communications module providing additional control and information. The unit is of single solid state construction and easily mounted with two screws. The new controller is field interchangable with our existing controllers.

FEATURES: 

• Position Control of +/- 0.1 degree
• Adaptive Control feature continously adjusts for load and actuator conditions eliminating recalibration.
• Three Button Control provides easy setup and eliminates the need for additional equipment.
• Polarity Detection feature allows direct or reverse acting operation without rewiring.
• Electronic Brake feature can eliminate need for mechanical brake or extend brake life if used.
• Stall Detection feature protects actuator motor from a stall condition.
• Automatic Duty Cycle Control feature prevents shutdown of a process due to thermal overload.
• Operating Temperature range of 32°F to 140°F